When selecting an on-site Microsoft vendor, make some wise choices regarding the scheduling of the training event.  You want to get the biggest bang out of your dollar.  Make sure small mistakes don’t take away from the training experience you have paid for.

Date of Training

Do NOT schedule classes for 8am on Monday morning. Something always happens that causes people be late or not show up.  I call it the Monday effect.  On the flip side, there is also the Friday effect.  Don’t have classes end at 5p on Fridays.  This may cause resentment to the training provider because the employees are ready for the weekend.

Location of Training

Make sure you have reserved the training room.  So often, we start the class and another department shows up and makes a claim for the room.  This causes a distraction until the issue is resolve

Access to the training room

Make sure the trainer has access to the building and the training room.  They typically need to setup prior to the class, so make sure arrangement have been made.  This may involve telling security and other access employees this information prior to the training.  Delays with this may delay the start of training.

Software Installed

Make sure the employee are using the software that is being trained.  Sounds silly but ¾ of the classes I have trained, have delays because the software was never installed.  This wasn’t discovered until the training had begun and the employees spoke up.

Photos and Filming of Event

Make sure your employees realize this provider is not an employee so don’t take liberties such as photos for films of the class.  With social media, some students think it fun to upload videos or photos to Facebook or MySpace.  Depending on the vendor you select, you may be charged more for recording the training event.

These are just a few tips to keep in mind when bring an onsite Microsoft trainer to your company. These tips will allow a comfortable training environment for everyone involved as your employees enjoy the training experience!

Microsoft Training Courses Gives You the Edge

Microsoft training courses give you the differentiation that is required to speed up your career. Business today is unthinkable without computers. No matter which sector you go to and which business function you cater to, you, IT is omnipresent. So if you want to be a part of the revolution, you need to be computer literate. There are so many courses available – starting from basic computer knowledge to Microsoft training courses to Cisco certifications. Among them, Microsoft training is the most sought after IT certification. The environment is ever changing. Any technology that was at a peak two years ago is nearly obsolete today. So even if you have done Microsoft training courses some time back, it makes sense to upgrade your knowledge now. You need to enrol yourself into proper classes and do the training seriously.

An Overview Of Microsoft Training

Microsoft is considered to be the leader in software technology as a majority of the computers run on its programs. A Microsoft Certification is the only certificate that is recognised all over the world. There are a variety of Microsoft training courses. Almost all of them teach you the basics like MS Word, PowerPoint, Excel, Access, Windows XP, Outlook, and Server Windows Vista. By learning these programs, you can customise your database and enhance your efficiency. You can present any information in a professional manner. With a Microsoft certification, you can also expect a salary and position hike as you will have an edge over your peers.

Nowadays, most companies encourage their employees to take up Microsoft training courses. They are even ready to pay for the courses. The employers have realised that if their employees are Microsoft certified, it will be mutually beneficial. The Microsoft Office Specialist (MOS) Certification validates your capabilities with the Microsoft Office suite. If you have the certification, employers will give you special preference. They ensure enhancement of your capabilities as this certification is honoured all over the world. It is not too difficult to get this certification. You need to put in a little bit of dedication to your studies. It is better if you join some classes where professional instructors can guide you. These are specialised courses that need professional guidance.

Apart from the simple ones, there are other Microsoft training courses that are for people looking for advanced training. If you are into application development, you might want to do Microsoft Software Application Developer courses. These courses give a better understanding of the Microsoft .NET Framework. The Microsoft Certified Systems Engineer (MCSE) course provides a better understanding of the main software operating systems and networking protocols. The Microsoft Certified Application Developer (MCAD) trains professionals on various aspects of design, development, and testing. The best course for network administrators is MCSE certifications. MCSE exams deal with networking technologies and software development. It imparts knowledge on various network protocols. With Microsoft training courses you can kick start your career and go far ahead of your peers.

James Copper is a writer for http://www.trainingindex.co.uk where you can find information on microsoft training courses

The Benefits of Onsite Computer Training

If you run a business, chances are you will certainly want to improve the efficiency and skills of all your employees. With many of what is done in business revolving around the computer and what it can do for your business, it stands to reason that computer training for your employees will be greatly beneficial. The challenge then becomes where to have this training done. More businesses are now opting for onsite computer training in an effort to reduce the cost associated with traveling. Here are some of the benefits of training onsite.

Possibly the more obvious benefit of onsite computer training is that training will take place in a familiar environment. A number of studies have concluded that when people are trained in an environment that is familiar to them they tend to do better at learning than people in a strange environment. Therefore computer training that takes place in a familiar location will allow the trainee to be more focused on what is being taught and not on their surroundings.
Also by training onsite businesses can save money. The cost associated with sending people to be trained at a different location can at times be very prohibitive and expensive. Thus companies often opt for the trainers to come to them and this is often more affordable.

The onsite computer training class allows for all staff members to have their training done together. This facilitates employees working together to find solutions to problems and also address concerns. Staff members will be more comfortable being around one another and will by extension learn the material quicker.

Another great benefit is that companies are better able to have the learning experience customized. The company is likely to have particular training requirements that may need to be incorporated into the design of the computer training sessions and what is taught.

Onsite computer training is likely to grow in popularity as companies seek to maximize their employee’s competences and productivity. The benefit of employees learning better when, serves to decrease the lapse time between training and application of what is learned.

It may become necessary sometimes for companies to have training done elsewhere making travel necessary. This kind of situation however, is fast becoming unnecessary especially as technology has improved dramatically allowing onsite training to take place anywhere. Employees tend to also prefer training onsite and are more comfortable there. The company also ends up saving a lot of money in the long run.

Boost Your Job Qualifications Via Computer Training

Microsoft Training is always a good thing to because most companies use Microsoft products. At the moment many people are between jobs and the chances are that they are getting some extra training in while they are looking for work to both pass the time usefully and to improve the look of their CV. It is well worth thinking about the people that you would be competing against if you were looking for a job. What sort of qualifications might they be getting to enhance their skills.

It is worth thinking hard about this even if you have a job at the moment. However, secure you might think your position is, it could be the case that you get made redundant for some reason. It is therefore important to make sure that you are in the best possible position to get a new job and to get one quickly. As well as making sure that your CV is as up to date as possible, it is also a good idea to make sure that your skills and qualifications are up to date. It is worth considering doing a course which will not only show your enthusiasm for the subject, your desire to improve and your interest in that area but it will also show that you have good qualifications. Something like a BizTalk training class will be easy for you to start and fit in around your job, should you need to. It will be able to teach you everything you need to know about the relevant topic that you need to study as well as being convenient for you. There are a lot of opportunities for study these days, you do not have to always travel away and do an expensive course in a capital city. It is possible to do training in front of your computer at home and get a perfectly credible qualification.

Do careful research and you will be able to find all about what is available and be able to compare the prices of the courses as well as the types of courses and how they work. If you have not studied for a while you will probably be surprised at the opportunities that are around and how easy it is these days to get some qualifications or some new skills. It could be a real help to your employment prospects and you might even enjoy it.

When selecting your onsite Microsoft Training Provider, make sure you get all of your requirements met before a selection is made.  The provider should have the experience and  that makes them a fit for your company.  Before making a selection, ask these questions?

Is The Course Content Relevant to Your Industry?

Once you have decided to have a provider come onsite for your training, make sure the course content is relevant to your industry.  Alot of providers will show canned examples that may or may may be relevant to your company.  Insist on using a provider who will provide content in your industry so the skills learned will be retained!

How Available is the Company?

Are they willing to work with your schedule?  Training On The Go realizes that training must be adaptable to the clients needs.  This is why they offer training schedules to fit your needs.  Once you pick your course content, you can select when the class takes place.  This can be mornings, afternoon, evenings, and even weekends!

Will They Allow For Course Customization?

Instead of using canned examples, does the provider allow for customization?  This is imperative for the skills learned to be retained.  The provider needs to be willing to step away from their “script” and allow for your company’s input in the course development.  This may include topic selection,  client example usage, or development of customized examples around client’s industry.

Of Course, What Costs Are Involved?

Lastly, cost is most often the deciding factor.  Be sure to compare the provider with similar providers and weigh the services gained.   Are your requirements being met or are you being made to fit into a mold they use for each and every client?

Select a provider who treats you as the unique client you are.  Your needs are specific to your industry and your training should reflect that!  Don’t settle for canned sessions when you can have so much more.

Online Computer Training Vs Onsite Computer Training

You can get computer training in many different places at many different times to learn a wide variety of different things. Computers have become indispensible in our society and the result is that we often have to learn to do things that don’t come naturally or we just have not been exposed to. If you don’t want to simply fake your way through another interview when you are asked if you know how to use a specific program, why not just learn how? You can choose to either learn the program online or you can do it onsite in a class room setting.

There are benefits and drawbacks to both online and onsite computer training. You really need to choose the type of training that will fit your needs, your learning style, your budget, and your schedule the very best. Some people do better with an online type of training while others do better with an onsite. Choosing the right type of computer training for you is important.

With online trainings you have the benefit of being able to do the training when it suits you. Instead of having to sit in a classroom and listen to someone talk, you can do the training when it is right for you, whether that is early in the morning or late at night. Another great part of online computer training is that you can repeat a lesson until you have mastered a new skill. Instead of trying to learn at the pace as everyone else in the classroom you can learn at your pace, soaking things up.

Of course, there are some drawbacks to online training. You need to consider the fact that you may have questions and if you are online you won’t have anyone to ask. You may not hold yourself accountable, so you may not pick up on things as fast as you could if you took an onsite course.

An onsite course is also very beneficial because you are with an instructor who understands the program in and out. If you have any questions you can ask and have them answered. You will become proficient in very little time and you’ll be ready to start using the program on your own. You’ll have the benefit of interacting with your peers and picking up on their tips.

The drawbacks of an onsite course are that you have to be there at a certain time at a certain place. You may not learn the same way as everyone else in the classroom, and you may find that this is a type of training that you just cannot afford as it tends to be more expensive. Onsite training works well, but it is not for everyone.

Training On The Go offers onsite and online Microsoft training for corporations that need the training but don’t currently have the in-house resources to handle such training. They have been training Microsoft Office courses for years and have the flexibility to meet most corporate requests.  They take care of your Microsoft corporate computer training needs!

What makes them different?

They come to your location.

They come to your location and train in your facility.  This gives your users a sense of familiarity and makes the training process flow easier.  This helps users who are already uneasy about learning new topics because they are in their comfort zone and this helps training immensely.

They customize courseware for your needs.

The courseware is customized to your needs.  The books are created for your users after topics are selected from a list of available topics.  This allows the organizer to remain in control and determine what they users will see and experience.  So no more canned examples!  Instead, you get a class customized to your needs!

They use your industry examples.

Class participants are encouraged to bring their own examples to class.  This allows them to apply the skills learned in to their daily work load.  This also allows them to get answers to their pressing questions regarding issues they have with the Office application they use everyday.

They train on your time schedule.

Classes are trained on the schedule you dictate.  They realize training can’t always take place from 8a – 5p.  If you decided on a couple of hours or a full day, they can adapt and make this training happen for you.  They have been know to do evening and weekend training to fit their client’s training needs!

Online or Onsite

Classes can be taught online or on-site. They can come to your site or train the course online.

How to contact Training On The Go for a quote?

1. Email them at info@trainingonthego.com
2. Call them at 407-745-1030

3.  Visit Training On The Go.Com